- CONTACT:JEFF GUAN
MOB:+86 15330893333
EMAIL: league@honestleague.com - CONTACT:ELVA JIANG
MOB:+86 15842555968
EMAIL:league@honestleague.com - CONTACT:CINDY
MOB:+86 18241579361
EMAIL:cindy@honestleague.com
Low Density Desander / Centri Cleaner
Brief Introduction
The desander is a kind of forward cleaner which takes advantage of centrifugal principle to remove the impurities from pulp. It can remove the sand, iron filings, dust and large plastic pieces, ceresin was, foam, melt adhesive, mixed waste, fasciculus and other impurities.
Main Technical Parameter
Type | TSC-400 | TSC-600 | TSC-700 |
Rated throughput amount for single piece | 400L/min | 600L/min | 700L/min |
Pulp feeding concentration | 0.3-1.0% | ||
Pulp feeding pressure | 0.25-0.35Mpa | ||
Rated differential pressure of pulping in/out | 0.15Mpa | 0.16Mpa | 0.17Mpa |
Min. accepts pulp pressure | 0.03Mpa | ||
Slag discharge rate for single stage volume | 5-10% | 4-8% | 4-8% |
Slag discharge rate for single stage round | 12-20% | 15-24% | 15-24% |
Slag discharge port diameter | 4-16 | ||
Slag discharge mode | Open/pressurized/closed |